Burger Tuning VAG JB4 Gen3B Beta (Group 8)
This plug and play Audi tuner plugs in to easy access sensors in the engine bay and works with your factory ECU tuning to remap your boost, timing, and fueling for optimal performance and reduced turbo lag. It features a 64mhz processor allowing sensors to be sampled 800 times per second using dedicated 10 bit digital to analog converters, ensuring smooth and powerful performance. Minimum power gains of 30whp and 45ft lb on 91AKI/95Ron
Unlike other tuning systems the JB4 includes a fully programmable CANbus system, at home upgradable firmware, and data logging capability. CANbus allows the JB4 to access engine data to take in to account pedal input, throttle position, gear, engine speed, air/fuel ratio, fuel trims, ignition advance, knock, and many other factors and incorporate those in to the performance mapping. It can also read/delete fault codes, incorporate unique safety features such as keeping boost pressure low until oil and water is up to temperature to provide proper engine and turbo lucubration, and drop to a low boost map if the engine starts to over heat, run lean, excessively knock, or over boost.
The default JB4 map1 runs 3psi over stock peak and tuned maps including stock and valet mode can be selected on the fly using a BMS diagnostics cable or JB4 mobile smart phone adapter.
Installation is very discrete and it quickly removes without a trace when needed. Fuel economy during normal driving is unchanged. Compatible with all driving modes. Made in USA. 5 year warranty.
Further information can be found at our discussion forum here:
https://www.n54tech.com/forums/showthread.php?t=55309
Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit, or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. Separate JB4 Mobile app purchase also required.
APPLICATIONS
- Audi 8V A3 2.0T 184hp
- Audi B9 A4 2.0T 190hp
- Audi B9 A5 2.0T 190hp
- Skoda Kodiaq 2.0T 180hp
- Seat Ateca 20T 190hp
- VW Aerton 2.0T 190hp
- VW Tiguan 2.0T North American
- VW Tiguan 2.0T 140kw/184hp
- VW T-Roc N1 2.0T 184hp
- VW Passat 2.0T North American 174hp
- VW Polo GTI 2.0T 200hp
INSTALL GUIDE
Connect with JB4 Bluetooth Connect Kit or Data Cable
The JB4 Connect Kit (Rev 3) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run wires inside the cabin. It’s compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you’re off and running.
Please note the JB4 Mobile app is available for both iOS or Android and sold separately via the iOS or Android app store on your phone. This adapter is not compatible with the JB4 windows interface.
Key Features:
• Monitor your vehicle with a variety of live gauges
• Take logs to tune your vehicle to perfection
• Graph your logs to review performance
• Read/Delete error codes
• Change maps
• Change user adjustment/methanol settings
• Update JB4 firmware
Burger Tuning VAG JB4 Gen3B Beta (Group 8)
This plug and play Audi tuner plugs in to easy access sensors in the engine bay and works with your factory ECU tuning to remap your boost, timing, and fueling for optimal performance and reduced turbo lag. It features a 64mhz processor allowing sensors to be sampled 800 times per second using dedicated 10 bit digital to analog converters, ensuring smooth and powerful performance. Minimum power gains of 30whp and 45ft lb on 91AKI/95Ron
Unlike other tuning systems the JB4 includes a fully programmable CANbus system, at home upgradable firmware, and data logging capability. CANbus allows the JB4 to access engine data to take in to account pedal input, throttle position, gear, engine speed, air/fuel ratio, fuel trims, ignition advance, knock, and many other factors and incorporate those in to the performance mapping. It can also read/delete fault codes, incorporate unique safety features such as keeping boost pressure low until oil and water is up to temperature to provide proper engine and turbo lucubration, and drop to a low boost map if the engine starts to over heat, run lean, excessively knock, or over boost.
The default JB4 map1 runs 3psi over stock peak and tuned maps including stock and valet mode can be selected on the fly using a BMS diagnostics cable or JB4 mobile smart phone adapter.
Installation is very discrete and it quickly removes without a trace when needed. Fuel economy during normal driving is unchanged. Compatible with all driving modes. Made in USA. 5 year warranty.
Further information can be found at our discussion forum here:
https://www.n54tech.com/forums/showthread.php?t=55309
Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit, or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. Separate JB4 Mobile app purchase also required.
APPLICATIONS
- Audi 8V A3 2.0T 184hp
- Audi B9 A4 2.0T 190hp
- Audi B9 A5 2.0T 190hp
- Skoda Kodiaq 2.0T 180hp
- Seat Ateca 20T 190hp
- VW Aerton 2.0T 190hp
- VW Tiguan 2.0T North American
- VW Tiguan 2.0T 140kw/184hp
- VW T-Roc N1 2.0T 184hp
- VW Passat 2.0T North American 174hp
- VW Polo GTI 2.0T 200hp
INSTALL GUIDE
Connect with JB4 Bluetooth Connect Kit or Data Cable
The JB4 Connect Kit (Rev 3) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run wires inside the cabin. It’s compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you’re off and running.
Please note the JB4 Mobile app is available for both iOS or Android and sold separately via the iOS or Android app store on your phone. This adapter is not compatible with the JB4 windows interface.
Key Features:
• Monitor your vehicle with a variety of live gauges
• Take logs to tune your vehicle to perfection
• Graph your logs to review performance
• Read/Delete error codes
• Change maps
• Change user adjustment/methanol settings
• Update JB4 firmware
If you need to ask a question, or simply want to know if this product fits your car, please contact us.
We would love to help!
If you need to ask a question, or simply want to know if this product fits your car, please contact us.
We would love to help!
Sign up to our rewards program, and receive 10 points, for every £1 spent here at Diversion Automotive.
Sign up to our rewards program, and receive 10 points, for every £1 spent here at Diversion Automotive.
Please see our Shipping Policy for information.
Please see our Shipping Policy for information.
To get the most out of your product, it is important to know how to care for it.
Interior parts must be cared for with non-abrasive interior cleaners.
Exterior components should be cared for with PH neutral, non abrasive cleaning products.
Our team are most happy to assist if you have any questions about the care of your product.
To get the most out of your product, it is important to know how to care for it.
Interior parts must be cared for with non-abrasive interior cleaners.
Exterior components should be cared for with PH neutral, non abrasive cleaning products.
Our team are most happy to assist if you have any questions about the care of your product.
For more information, please see our product warranty page.
For more information, please see our product warranty page.
